Seals play a major role in hydraulic cylinders – they contain the fluid and prevent the leakage of fluid. The seals for a rod sealing system protect the reciprocating motion for the piston rod and gland.
Here are some types of seals you will normally find in a Hydraulic Cylinder:
Piston seals — keeps oil on the work side of the piston. Prevents oil travel between cylinder sides.
Rod seals — prevents any leakage from inside the cylinder to the outside.
Buffer seals — absorb changes in pressure when working with high-load conditions. Normally found in front of the rod seal.
Wiper seals — prevent any outside contaminants or debris from entering the cylinder system.
Wear bands — guide the piston and rod. Also prevents metal to metal contact.
Listed below are some common reasons for seal failures:
Hardening — too much heat being generated from a high-speed application or environmental conditions surrounding the cylinder.
Wear — excessive wear due to lack of lubrication.
Contamination — any small pieces of metals or debris entering inside can damage inside components.
Fracture — resulting from excessive back pressure
Improper Installation — not using the proper tools to install seals can lead to damage and leaks. Most manufacturers offer installation tips, including surface specs and groove dimensions.
VICPAS sells new surplus and reconditioned HMI parts which are sourced through independent channels. All warranties and support, if applicable, are with VICPAS, and not the manufacturer. This website is not sanctioned or approved by any manufacturer or tradename listed. VICPAS is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners